Went for a 1000 km ride last week, bike ran well except for the following. Clutch has always felt a bit heavy/wobbly/vibey/noisy at 2500 to 3000 revs but fine above 3000 revs. Towards the end of the ride the vibrations etc were felt up towards 4000revs then ok.
On removing the primary cover there is about 3mm of movement in the clutch basket. I can wobble it side to side a few mm. Is this ok?
I’ve pulled it all apart and all seems fine no real wear issues. The peened over studs are solid…
On removing the primary cover there is about 3mm of movement in the clutch basket. I can wobble it side to side a few mm. Is this ok?
I’ve pulled it all apart and all seems fine no real wear issues. The peened over studs are solid…