by | Dec 26, 2022 | Norton Commando Category
I’m replacing the inner primary on my mk3 and I would like to know how to remove the starter drive idler gear. Could someone please enlighten me? Thanks.
by | Dec 26, 2022 | Norton Commando Category
I work for an automotive supply company, not one of the national chains, but we have close to 100 stores in the northeast and central east coast. I’m semi retired and not desperate for the cash but it keeps me busy and makes life a lot easier. The company...
by | Dec 26, 2022 | Norton Commando Category
Who do the UK crowd use for insurance? I’ve used Carol Nash for the last 12 years but they’ve been starting to get expensive in the last few years. It’s got to the point that I thought they were taking the piss a bit so I bailed. The only other...
by | Dec 26, 2022 | Norton Commando Category
Hi again everyone I hope you have all had a good xmas and have and a happy new year, I have what is almost definitely a repro seat which fits surprisingly well and looks as it should, but it does not have a fitting hole threaded or otherwise for the cable that stops...
by | Dec 26, 2022 | Norton Commando Category
Just fitted a pair of Bridgestone Battlax BT46 tyres to my Atlas-framed special and it seems the 4.00 x 18 rear tyre is too wide to fit in the stock swingarm. Jams up solid unless I sit the axle right at the back end of the adjuster slots. Measured the tyre with...
by | Dec 25, 2022 | Norton Commando Category
I removed my valve guides yesterday to measure for replacement, but ran into a bit of a dilemma… When I measured the old cast iron guides, I was getting between 0.511”- 0.514”. Granted this is with a digital caliper (I need to pick up a 0-1” micrometer). However, the...
